|
|
|
|
|
2" Diameter x 1/8" wall x 8" Face Length Aluminum Dead Shaft Idler Roll (502280)
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 8" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 6" Face Length Aluminum Dead Shaft Idler Roll
|
|
2" Diameter x 1/8" wall x 8" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
B-7472-002: 2" Diameter x 1/8" wall x 11" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 11" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
B-7472-003: 2" Diameter x 1/8" wall x 13" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 13" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 17" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 17" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 20" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 20" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
1.25" Diameter x 1/8" wall x 8" Face Length Aluminum Dead Shaft Idler Roll
|
|
2" Diameter x 1/8" wall x 20" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 19" Face Length Aluminum Dead Shaft Idler Roll
|
|
2" Diameter x 1/8" wall x 20" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 24" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 24" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 21" Face Length Aluminum Dead Shaft Idler Roll
|
|
2" Diameter x 1/8" wall x 21" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
2" Diameter x 1/8" wall x 22" Face Length Aluminum Dead Shaft Idler Roll
|
|
2" Diameter x 1/8" wall x 21" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
B-7472-022: 2" Diameter x 1/8" wall x 26" Face Length Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
2" Diameter x 1/8" wall x 26" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
B-7472-023: 2" Diameter x 1/8" wall x 13" Face Length Aluminum Dead Shaft Idler Roll with black hardcoat anodize
|
|
2" Diameter x 1/8" wall x 26" Face Length Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
Roller - Double End Supported - Dead Shaft - Male Threaded Ends
|
1 in stock!
|
|
|
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
Roller - Double End Supported - Dead Shaft
|
|
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
Roller - Cantilevered - Dead Shaft
|
|
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
Roller - Cantilevered - Dead Shaft - Concave
|
|
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
B-7473-001: 3/4" dia. x 9" long Mounting Shaft for Idler Roll
|
15 in stock!
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
3/4" dia. Mounting Shaft for Idler Roll
|
|
3/4" dia. Mounting Shaft for Idler Roll
|
|
|
|
|
|
|
|
B-7473-002: 3/4" dia. x 12" long Mounting Shaft for Idler Roll
|
1 in stock!
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-003: 3/4" dia. x 14" long Mounting Shaft for Idler Roll
|
(Out of Stock)
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-004: 3/4" dia. x 18" long Mounting Shaft for Idler Roll
|
(Out of Stock)
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-005: 3/4" dia. x 21" long Mounting Shaft for Idler Roll
|
(Out of Stock)
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-006: 3/4" dia. x 25" long Mounting Shaft for Idler Roll
|
1 in stock!
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-013: 3/4" dia. x 8.187" long Mounting Shaft for Idler Roll
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
3" Dia. x 60" Face x 70" Overall length dead shaft 1/4" wall aluminum idler roll with 1" steel shaft with 1/2" - 13" X 1" Deep Tapped Ends
|
4 in stock!
|
|
|
Shaft stationary, idler rotates
|
|
|
|
|
|
|
|
B-7473-014: 1" dia. x 70" long Mounting Shaft for Idler Roll
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7473-014: 3/4 Dia. Mounting Shaft for Idler Roll
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
3" Dia. x 80" Face x 87-1/2" Overall length dead shaft 1/4" wall aluminum idler roll with 1" steel shaft with 1/2" - 13" X 1" Deep Tapped Ends
|
|
Shaft stationary, idler rotates
|
|
|
|
|
|
|
|
Q-7066: Roller - Cantilevered - Dead Shaft with set screw adjustment
|
|
Face Diameter: 2" Face Width: 3.5" Journal Diameter: 1-3/4" Journal Width: 0.5" Roller Face Finish: None Dynamic Balance: No Overall Length: 4.5"
With set screw adjustment
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
Q-7065: Roller - Cantilevered - Dead Shaft
|
|
Face Diameter: 2" Face Width: 3.5" Journal Diameter: 3/4" Journal Width: 0.5" Roller Face Finish: None Dynamic Balance: No Overall Length: 4.5"
Shaft is stationary (Dead) and roller face rotates.
|
|
|
|
|
|
|
|
B-7473-010: 3/4" dia. x 15" long Mounting Shaft for Idler Roll
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
Roller - Double End Supported - Live Shaft
|
|
Roller Face and journal rotate together.
|
|
|
|
|
|
|
|
Corrugating Rolls - Chrome Plated for Langston Model XD 87" Single Facer - C Flute, 12" diameter, per set
|
|
Chrome Plated Corrugating Roll
|
|
|
|
|
|
|
|
Corrugating Rolls - Tungsten Carbide Coated for Langston Model XD 87" Single Facer - C Flute, 12" diameter, per set
|
|
Tungsten Carbide Coated Corrugating Roll
|
|
|
|
|
|
|
|
Anilox Roll for Webtron 650 1/8" Pitch, 440 LPI, 4.7 BCM
|
|
2.562" Diameter x 6.75" long 440 LPI, 4.7 BCM
|
|
|
|
|
|
|
|
Anilox Roll for Webtron 650 1/8" Pitch, 800 LPI, 2.1BCM
|
|
2.562" Diameter x 6.75" long 800 LPI, 2.1BCM
|
|
|
|
|
|
|
|
Anilox Roll for Webtron 750 1/8" Pitch, 63 Tooth, 700 LPI, 2.9BCM
|
|
2.504" Diameter x 7.75" long 63 Tooth, 700 LPI, 2.9BCM
|
|
|
|
|
|
|
|
Anilox Roll for Webtron 750 1/8" Pitch, 64 Tooth, 700 LPI, 2.9BCM
|
|
2.546" Diameter x 7.75" long 64 Tooth, 700 LPI, 2.9BCM
|
|
|
|
|
|
|
|
Anilox Roll for Propheteer 10", 800 LPI, 2.1 BCM
|
|
2.63" Diameter x 11.25" long 800 LPI, 2.1 BCM
|
|
|
|
|
|
|
|
3" Diameter x 1/2" wall x 60" Face x 64" Long Aluminum Dead Shaft Idler Roll
|
(Out of Stock)
|
|
|
3" Diameter x 1/2" wall x 54" Face x 58" Long Aluminum Dead Shaft Idler Roll
|
|
|
|
|
|
|
|
Corrugating Rolls - Chrome Plated E Flute, 304 mm diameter x 65" body, per set - Customer to supply drawing
|
|
Chrome Plated Corrugating Roll
|
|
|
|
|
|
|
|
Corrugating Rolls - Chrome Plated for Langston Model XD 87" Single Facer - C Flute, 12" diameter, per set
|
|
Chrome Plated Corrugating Roll
|
|
|
|
|
|
|
|
Corrugated Roll - Chrome Plated
|
|
Chrome Plated Corrugated Roll
|
|
|
|
|
|
|
|
Corrugated Roll - Tungsten Carbide Coated
|
|
Corrugated Roll - Tungsten Carbide Coated
|
|
|
|
|
|
|
|
Anilox Roll - Chrome Plated
|
|
Anilox Roll - Chrome Plated
|
|
|
|
|
|
|
|
Anilox Roll - Ceramic
|
|
Anilox Roll - Ceramic
|
|
|
|
|
|
|
|
B-7472-011: 2" Diameter x 1/8" wall x 24" Face Length Aluminum Dead Shaft Idler Roll, with Teflon Impregnated Hardcoat Anodize Finish
|
|
2" Diameter x 1/8" wall x 24" Face Length Aluminum Dead Shaft Idler Roll, with Teflon Impregnated Hardcoat Anodize Finish. Minimum order of 7 pieces to receive this price.
|
|
|
|
|
|
|
|
B-7472-018: 2" Diameter x 1/8" wall x 22" Face Length Aluminum Dead Shaft Idler Roll, with Teflon Impregnated Hardcoat Anodize Finish (Same as B-7472-011 except with 22" face)
|
Our Price: $272.20 Each for Minimum Qty of 6
|
|
|
2" Diameter x 1/8" wall x 22" Face Length Aluminum Dead Shaft Idler Roll, with Teflon Impregnated Hardcoat Anodize Finish. Minimum order of 6 pieces to receive this price.
**Same as B-7472-011 except with 22" face.
|
|
|
|
|
|
|
|
B-7473-011: 3/4" dia. x 16" long Mounting Shaft for Idler Roll
|
9 in stock!
|
|
|
In Stock Ships in 1 - 2 Days Out of Stock and/or Balance ships in 2 - 4 weeks
|
|
|
|
|
|
|
|
B-7507: Base - Idler Roller
|
|
Base - Idler Roller
|
|
|
|
|
|
|
|
Corrugating Rolls - Tungsten Carbide Coated, F Flute, 304 mm diamter x 65" body, per set - Customer to supply drawing
|
|
Tungsten Carbide Coated Corrugating Roll
|
|
|