Q-6682 3" Diameter Lateral Adjusting Integrated Shaft Leaf Type Air Mandrel - MDLA Series
Part #: Q-6682
Our Price: $1,537.26
Description
Core Inner Diameter: 3"
Length (A): 2.625
Length (B):4.5
Length (F): 0.609 (revised 3/32/2021 TR, was 5.1875)
Outer Diameter (D): 1
Outer Diameter (E): 2
Adjustable Core Stop: Yes
Flange: Yes
Keyway: Yes
Rear Guide Flange Holes: No
Air Connection Type: 1/8 NPT RH (Right Hand)
Leaf Length: 16"
3" Diameter Lateral Adjusting Integrated Shaft Leaf Type Air
Mandrel - MDLA Series
How it works:
Shaft and core chuck rotate as one member in bearings and can be driven or
braked. Operator loads material onto core chuck and inflates. While core chuck
is rotating, operator can grab the adjusting nut with one hand and turn the
adjusting screw with the other hand. This unique feauture allows the machine
to continue running without the need to shut down the line for adjustments
in axial postion of web. This is the fine adjustment / lateral adjusting feature.
Typical adjustment range of adjustment is +/-1/2". Larger adjustment
ranges are available.
To make coarse adjustment to roll position, lock the adjustable core stop along
the bar in the desired location. When roll is loaded, it will hit against the
adjustable core stop and postion the roll.
This design is based on the MD series therefore the same features apply:
- Proven Reliable Design
- Continuous leaves
-
Extra Heavy Bladder
-
Patented Easy Change Bladder System ; No Speceial Tools Required; No need to remove Shaft from Machine
-
Steel to Steel contact on wear surfaces
-
Collapsed diameter (F) : 2.985"
-
Inflated diameter: 3.093"
-
80 psi air pressure required (no oil)
-
Material Composition Exterior: Aluminum, Black oxide Stainless Steel, Zinc Plated Carbon Steel
-
Material Composition Interior (under leaves): Rubber, Carbon Steel
Printer
Friendly Version