(Your shopping cart is empty)
How much clearance should I leave between the mounting shaft and core chuck?
Last Updated: 04/07/2007
|
A sliding fit which translates to a minimum clearance of 0.002” and a maximum clearance 0.006”. Our full line products are designed to incorporate this feature.
Example: Shaft outer diameter is 1.4995” / 1.4985” and core chuck bore is 1.504” / 1.502”.
Example Minimum Clearance: Shaft is made to high and core chuck bore is made to low: clearance is 1.502” – 1.4995” = 0.0025”. 0.0025” is greater than 0.002”.
Example Maximum clearance: Shaft is made to low and core chuck bore is made to high: 1.504” – 1.4985” = 0.0055”. 0.0055” is less than 0.006”
|
|
|
