Home > Core Chucks & Shafts >   Thru Bore Lug Type Air Chuck - LGJ Series
Shown with: 3" Core Inner Diameter, 2.004"/2.002"" Bore, A-1360 Valve Perpendicular to bore Rear Spilt Clamp Securing, Flange, 1.5" lug length, 5" Overall Length,	Send Me a Quote Availability: Usually Ships in 6 to 8 Weeks Product Code: LGJ_X_AC Core inner diameter*: 3" 70mm 10" 11" 12" 3.25" 3.5" 3.75" 4" 4.25" 4.5" 4.75" 5" 5.25" 5.5" 5.75" 6" 6.25" 6.5" 6.75" 7" 8" 9"    Bore*: 0.504" / 0.502" (1/2") 0.629" / 0.627" (5/8") 0.754" / 0.752" (3/4") 0.879" / 0.877" (7/8") 1.004" / 1.002" (1") 1.129" / 1.127" (1-1/8") 1.254" / 1.252" (1-1/4") 1.379" / 1.377" (1-3/8") 1.504" / 1.502" (1-1/2") 1.629" / 1.627" (1-5/8") 1.754" / 1.752" (1-3/4") 1.879" / 1.877" (1-7/8") 2.004" / 2.002" (2") 2.254" / 2.252" (2-1/4") 2.504" / 2.502" (2-1/2") 2.754" / 2.752" (2-3/4") 2.953" / 2.955" (2-61/64") 3.004" / 3.002" (3") Other (specify in addt'l info)    Length (A)*: Length (B)*: Length (C)*: Securing Method*: Split Clamp - Front Split Clamp - Rear Set Screw Clamp Ring None    Flange*: No Yes    Rear Guide Flange Holes*: No Yes Custom (specify in addt'l info)    Air Connection Type*: Valve - A-1360 Valve - A-1597 O-rings in Bore 1/8 NPT RH (Right Hand) #10-32    Air Connection Location*: Front (Chamfered End), Parallel to Bore Bore (O-rings) Rear (Un-Chamfered End), Parallel to Bore Rear (Un-Chamfered End), Perpendicular to Bore    Additional Information: Qty:

Description   Thru Bore Lug Type Air Chuck - LGJ Series allows for extremely large bores. What size shaft should I use? 80 psi air pressure required (no oil) Material Composition Exterior:  Carbon Steel and Aluminum Material Composition Interior (under lugs): Rubber, Carbon Steel   Features Pays for itself in very little time due to decreased down time during roll changes. No tools necessary. Empty cores remove instantly. Less chance of telescoping rolls when placing roll on arbor. No parts to remove or lose. Compensates for wide variation of core inside diameters automatically. Eliminates possibility of core damage. Drives equally in both directions (accelerating and decelerating) Interchangeable with any arbor mounted type chuck. Fully expanding periphery for maximum holding power. Lugs are limited by outer body in order to prevent over expansion (inflation without a core does not damage bladder) Bladder is fully protected by outer body whether inflated or deflated. Large bladder diameter produces maximum possible holding torque. Similar Items Rewind Air Chuck Assembly for 10" Mark Andy 830 Flange Mounted Torque Activated Shaftless Core Chu 3" Diameter Flange Mounted Leaf Type Air Mandrel - 3" Diameter JRC rotating core chuck for Mark Andy Our Price: $1,095.00 Send Me a Quote Send Me a Quote Our Price: $652.36 3" Diameter x 4" Leaf Integrated Shaft Leaf Type A Double End Supported Multi Bladder Shaft Air Mandr Flange Mounted Torque Activated Shaftless Core Chu Small Diameter Integrated Shaft Lug Type Air Our Price: $475.00 Send Me a Quote Send Me a Quote Send Me a Quote

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Core Chucks & Shafts Core Chucks & Shafts > Cantilevered Core Chucks & Shafts > Cantilevered > Air

	3" Diameter x 9" leaf x 1.5" Bore Leaf Type Air Chuck - HD Series $570.65
	Removable T-Handle Lock Air Regulator, 3/8 NPT, 0-125 psi $111.87
	Double End Supported Lug Shaft Air Mandrel - LGN Series
	Air Valve $20.47
	Rotary Union - 1/8" NPT Female Port - 3/8" -24 RH Male Rotor Air & Hydraulic $39.22