3" Diameter Thru Bore Leaf Type Air Chuck

Home > Core Chucks & Shafts > Cantilevered > Air > Thru Bore - STD Series >

3" Diameter Thru Bore Leaf Type Air Chuck - STD Series

Shown with:
1.254"/1.252"" Bore, Front A-1360 Valve,
Front Spilt Clamp Securing, Flange,
7" Leaves, 9-9/16" Overall Length

Alternate Views

Send Me a Quote / View Legacy Ordering System

Availability: Usually Ships in 2 to 4 Weeks
Product Code: STD3X_AC

Core inner diameter*:
Bore*:
Securing Method*:
Flange*:
Rear Guide Flange Holes*:
Air Connection Type*:
Air Connection Location*:
Leaf Length (B), Overall length (A)*:
Additional Information:

Qty:

Description

3" Diameter Thru Bore Leaf Type Air Chuck - STD Series

What size shaft should I use?

Dimension diagram

Collapsed diameter: 2.937"
Inflated diameter: 3.093"
80 psi air pressure required (no oil)
Material Composition Exterior: Aluminum, Black oxide Stainless Steel, Zinc Plated Carbon Steel
Material Composition Interior (under leaves): Rubber, Carbon Steel

Features

Pays for itself in very little time due to decreased down time during roll changes.
No tools necessary.
Empty cores remove instantly.
Less chance of telescoping rolls when placing roll on arbor.
No parts to remove or lose.
Compensates for wide variation of core inside diameters automatically.
Eliminates possibility of core damage.
Drives equally in both directions (accelerating and decelerating)
Interchangeable with any arbor mounted type chuck.
Fully expanding periphery for maximum holding power.
Leaves are limited by "U" shaped restrainers in order to prevent over expansion (inflation without a core does not damage bladder)
Bladder is fully protected by leaves and restrainers whether inflated or deflated.
Return springs are provided to bring leaves back to minimum diameter when deflated.
Large bladder diameter produces maximum possible holding torque.