Thru Bore Lug Type Air Chuck

Thru Bore Lug Type Air Chuck - LGJ Series

Shown with:
3" Core Inner Diameter,
2.004"/2.002"" Bore,
A-1360 Valve Perpendicular to bore
Rear Spilt Clamp Securing, Flange,
1.5" lug length, 5" Overall Length,

Send Me a Quote

Availability: Usually Ships in 6 to 8 Weeks
Product Code: LGJ_X_AC

Core inner diameter*:
Bore*:
Length (A)*:
Length (B)*:
Length (C)*:
Securing Method*:
Flange*:
Rear Guide Flange Holes*:
Air Connection Type*:
Air Connection Location*:
Additional Information:

Qty:

Description

Thru Bore Lug Type Air Chuck - LGJ Series allows for extremely large bores.

What size shaft should I use?

80 psi air pressure required (no oil)
Material Composition Exterior: Carbon Steel and Aluminum
Material Composition Interior (under lugs): Rubber, Carbon Steel
Dimension diagram

Features

Pays for itself in very little time due to decreased down time during roll changes.
No tools necessary.
Empty cores remove instantly.
Less chance of telescoping rolls when placing roll on arbor.
No parts to remove or lose.
Compensates for wide variation of core inside diameters automatically.
Eliminates possibility of core damage.
Drives equally in both directions (accelerating and decelerating)
Interchangeable with any arbor mounted type chuck.
Fully expanding periphery for maximum holding power.
Lugs are limited by outer body in order to prevent over expansion (inflation without a core does not damage bladder)
Bladder is fully protected by outer body whether inflated or deflated.
Large bladder diameter produces maximum possible holding torque.