(Your shopping cart is empty)

  Home > Core Chucks & Shafts > Cantilevered > Air > Thru Bore - STD Series >

Q-7054: 3" Diameter Thru Bore Leaf Type Air Chuck - STD Series

3" Diameter Thru Bore Leaf Type Air Chuck - STD

Shown with:
1.254"/1.252"" Bore, Front A-1360 Valve,
Front Spilt Clamp Securing, Flange,
7 " Leaves, 9.562" Overall Length


 

Availability: Usually Ships in 2 to 4 Weeks
Part #: Q-7054
Qty:

Description
 
Core inner diameter: 3"
Bore: 1.504" / 1.502" (1-1/2")
Securing Method: Split Clamp - Rear
Flange: Yes
Rear Guide Flange Holes: No
Air Connection Type: Valve - A-1597
Air Connection Location: Rear (Un-Chamfered End), Perpendicular to Bore
Leaf Length (B), Overall length (A):4", 6.562"

3" Diameter Thru Bore Leaf Type Air Chuck - STD Series What size shaft should I use? Dimension diagram Collapsed diameter: 2.937" Inflated diameter: 3.093" 80 psi air pressure required (no oil) Material Composition Exterior: Aluminum, Black oxide Stainless Steel, Zinc Plated Carbon Steel Material Composition Interior (under leaves): Rubber, Carbon Steel
Features
  • Pays for itself in very little time due to decreased down time during roll changes.
  • No tools necessary.
  • Empty cores remove instantly.
  • Less chance of telescoping rolls when placing roll on arbor.
  • No parts to remove or lose.
  • Compensates for wide variation of core inside diameters automatically.
  • Eliminates possibility of core damage.
  • Drives equally in both directions (accelerating and decelerating)
  • Interchangeable with any arbor mounted type chuck.
  • Fully expanding periphery for maximum holding power.
  • Leaves are limited by "U" shaped restrainers in order to prevent over expansion (inflation without a core does not damage bladder)
  • Bladder is fully protected by leaves and restrainers whether inflated or deflated.
  • Return springs are provided to bring leaves back to minimum diameter when deflated.
  • Large bladder diameter produces maximum possible holding torque.

Customers Who Bought This Item Also Bought
Q-2707-023: Mounting Shaft Guide Flange - Fixed Guide Flange - Adjustable and Removable
Mounting Shaft for Thru Bore Air Chucks Guide Flange - Fixed Guide Flange - Adjustable and Removable

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Core Chucks & Shafts > Cantilevered > Air > Thru Bore - STD Series
Core Chucks & Shafts
Core Chucks & Shafts > Cantilevered
Core Chucks & Shafts > Cantilevered > Air
 About Us
 Privacy Policy
 Send Us Feedback